21

On Screen Display(OSD) Selection and Adjustment 

Press the      ,      buttons to reset immediately.

SETUP

MENU

: Exit
: Adjust
: Adjust

SET    

: Select another  

sub-menu

Main menu

Sub menu

Description

To choose the language in which the
control names are displayed.

To adjust position of the OSD window
on the screen.

LANGUAGE

OSD
POSITION

WHITE
BALANCE

If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.

Restore all factory default settings except

"LANGUAGE." 

FACTORY
RESET

POWER
INDICATOR

Use this function to set the power
indicator on the front side of the monitor
to 

ON

or 

OFF

.

If you set 

OFF

, it will go off. 

If you set 

ON

at any time, the power

indicator will automatically be turned on.

NOTE  

If this does not improve the screen image, restore the factory default settings. If necessary, execute the  
white balance function again. This function will be enabled only when the input signal is an analog signal. 

R T C

If you set 

ON

, you enable the Response

Time Control function and reduce the
afterimage of the screen.
If you set 

OFF

, you disenable the

Response Time Control function and
operate at panel response time.