Reference: Tweaking Tones
5•9
Delay
Select Knob –
turn to pick a Delay model.
Time –
for mono delays, sets the time for the delay line; for stereo delays, sets the time
for the left side delay line.
Tap –
set this to OFF to have this effect ignore tempo, or pick a note value that
you’d like your speed to match; works with the
Tap
button/footswitch and the
Tempo
knob.
Tempo –
Shows the tempo that’s been set by
Tap
, and lets you fine tune it.
Mix –
controls the ratio of wet (effected) to dry (non-effected) sound that is heard.
Bass –
bass tone control.
Treble –
treble tone control.
Fdbk –
adjusts how much of the delayed signal is fed back to the input of the delay.
Config –
allows you to choose the position of the Delay pedal in your signal flow:
Pre
(before the amp model), or
Post
(after the amp model).
ModSpd –
for delays with modulation, controls how fast (or slow) the modulating
waveform sweeps.
Depth –
for delays with modulation, controls the overall amplitude of the modulating
wave.