![background image](/i/line-6/144176/line-6-pod-x3-pod-x3-pro-pod-x3-live/h/line-6-pod-x3-pod-x3-pro-pod-x3-live-088.png)
Example Setups
7•4
Tone 1 Pan: Full Left
•
Tone 2: On
•
Tone 2 Pan: Full Right
•
3. Check your Master Volume.
Select the loudest preset/settings you intend to use.
•
Play your instrument and turn Master Volume as high as you can without clipping
•
the amp/speakers you’re feeding.
Feed Two Guitar Amps, One “Wet” and One “Dry”
1. Connect the left 1/4-inch output to one amp, and the right 1/4-inch output to the
other.
2. Set the first OUTPUTS page, (1/4-inch Outputs):
Mode: Combo Front, Combo Pwramp, Stack Front, or Stck PwrAmp.
•
Lows, Focus, Highs: as desired
•
Tone 1: On
•
Tone 1 Pan: Full Left
•
Tone 2: On
•
Tone 2 Pan: Full Right
•
3. Check your Master Volume.
Select the loudest preset/settings you intend to use for your “dry” sound.
•
Play your instrument and turn Master Volume as high as you can without clipping
•
the amp/speakers that you’re using as your dry amp.
4. Set up your “dry” tone.
Dial in your dry sound on Tone 1, with little or no “wet” effects,
•
Save your preset.
•
5. Set up your “wet” tone.