![background image](/i/line-6/137363/line-6-spider-jam/h/line-6-spider-jam-008.png)
Updated Features
1•4
Jam Control Mode
If you toggle the
SETTINGS
button and set the
FBV Mode
menu item to
Jam Control
,
you can control recording functions using an FBV. All Amp Model and FX controls on
the Spider Jam will still be available, as well as the 4 buttons, wheel and 4-way navigator.
In
Jam Control Mode,
Bank Up/Down and the FBV channel switches operate as follows:
Record/Overdub –
step on
Record
to begin recording your loop. If you start with
a Song or Drum countoff, recording begins after the count. If you punch in while a track is
playing, recording begins on the nearest beat. Overdub on an existing track at any time.
Play/Stop –
this switch simply plays or stops your loop. On your first pass, when you
initially record your loop, hitting
Stop
also sets your loop out-point.
Undo/Clear –
step on this switch to undo your last recorded take. To clear a track,
press and hold for a few seconds, then select
Clear
in the LCD and press
Undo
again.
1/2 Speed –
step on this switch to play your loop at 1/2 speed. Press it again
to toggle back to normal speed. If you overdub a guitar track at 1/2 speed, then toggle
playback to normal speed, your overdub will play back an octave higher.
Bank Up/Down –
Bank Up
loads the next internal recording;
Bank Down
loads
the previous one. The current recording name will be displayed in the FBV display.
*Note: When an SD track is loaded for playback and overdubbing, Bank Up/Down
will replace it with an internal recording, so be sure any SD track changes are saved.
A
B
C
D
D
A
B
C
E
E