![background image](/i/loewe/154312/loewe-connect-26-led/h/loewe-connect-26-led-080.png)
- 80
english
Connecting digital audio amplifiers
Continuation of the left column above ...
Connect the digital audio output of the TV set
AUDIO DIGITAL OUT
with
the digital audio input of the amplifier via a cinch cable:
Sound formats, amplifier type and other settings, see explanations of the
setting possibilities (left hand column).
Connecting audio amplifiers
The Sound Component Wizard allows the configuration of different
audio amplifiers (digital stereo and surround amplifiers) with different
digital sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). See the
operating manual of the audio amplifier for more information.
MENU:
Call
TV menu
.
Select
Connections
,
go to the menu line below.
Select
Sound components
.
OK
calls the sound components wizard
Mark the
HiFi/AV amplifier
.
OK Proceed
.
Continue: right column.
Explanations of the setting possibilities:
Select setting when an amplifier is connected and the TV
speakers are not used. After a HiFi/AV amplifier is regis-
tered in the sound menu, the sound can be switched
between the TV speakers and the amplifier with
Sound
via...
.
Specify sound formats which can be decoded with the
digital amplifier (see operating manual of the used amplifier).
Select either stereo or surround amplifier.
For every connected surround amplifier, select whether
the TV loudspeakers are to be used as centre speaker.
If so, establish a connection between the centre output
of the amplifier and the centre input of the TV set
CENTER IN
with a cinch cable.
Attention: Do not use the centre speaker connection of
the amplifier, use the centre pre-amp output instead
!
OK
OK
SOUND COMPONENTS
Sound playback via ...
TV speakers
7¯'!
HiFi/AV amplifier or TV speakers (switchable)
Proceed
External devices
DIGITAL IN
AUDIO
DIGITAL
OUT
TV set
Digital amplifier
HiFi/AV
amplifier or
TV speakers
(switchable)
Sound
formats
Type of
amplifier
TV loudsp. as
centre speaker