![background image](/i/loewe/153897/loewe-connect-32-3d-connect-40-3d/h/loewe-connect-32-3d-connect-40-3d-130.png)
- 130
english
Tilting the TV set
You can set the tilt angle of your TV set on the table stand to 0° or 2.5°.
Tools required:
Torx screwdriver T 20
Allen key 5 mm
First, loosen the topmost of the three retaining screws of the table stand
to get to the adjustment screw for the tilt angle (see illustration).
Then put the Allen key into the adjustment opening.
By screwing in the adjustment screw, you can adjust the tilt angle of the
TV set (turned to the left as far as it will go: 2.5°, to the right as far as
it will go: 0°).
When adjusting the tilt angle, position the TV set in the desired tilting
direction.
Please only use the tilt angle 0° or 2.5°. Intermediate positions are not
permitted and could damage the TV set.
➠
The table stand is delivered set at an angle of 2.5°.
➠
To adjust the tilt angle (turned to the left as far as it will go: 2.5°, to
the right as far as it will go: 0°), turn the screw with the Allen key
approx. 1.5 times.
➠
Do not overtighten the adjustment screw. This could damage the
TV set!
Screw the retaining screw back in again. Tighten it with a torque of ap-
prox. 2 Nm (hand-tight).
Tilting the TV set