![background image](/i/m-audio/152211/m-audio-m-track-plus/h/m-audio-m-track-plus-005.png)
5
Features
1 6 7
2
13
4 5
9
11
10
3
8
12
1.
USB Port:
Use the included cable to connect the M-Track Plus to a computer. M-Track
Plus requires a USB 1.1 (or higher) connection.
2.
Main Out:
Use standard 1/4" cables to connect this output to a pair of powered
speakers. The level of this output is controlled by the
Main Level
knob.
3.
Main Level:
Adjusts the output volume of the
Main Out
so you can control the listening
level of your connected powered monitors.
4.
MIDI In:
Use a standard five-pin MIDI cable to connect this input to the
MIDI Out
of an
external MIDI device.
5.
MIDI Out:
Use a standard five-pin MIDI cable to connect this output to the
MIDI In
of an
external MIDI device.
6.
S/PDIF In:
Connect the digital output of another device (e.g., a keyboard, digital cable
box, media streaming device, etc.) to this input using a 75
Ω
coaxial (RCA) cable. Note
that the
Gain
knobs,
Main Level
knob, and
Headphone Volume
knob do not affect the
signal level; the signal will be sent straight to your DAW without any adjustments.
7.
S/PDIF Out:
Connect the digital input of another device (e.g., a stereo system receiver,
solid-state flash recorder, etc.) to this output using a 75
Ω
coaxial (RCA) cable. The signal
sent from this output is identical to that of the
Main Out
.
8.
Input Selector:
Selects M-Track Plus's input source. For normal operation (using the
Mic
Inputs
and
Guitar/Line Inputs
), set this switch to
Analog
. When using the
S/PDIF In
, set
this switch to
Digital
; M-Track Plus will ignore the
Guitar/Line
Inputs
and
Inserts
.
9.
Phantom Power LED:
Lights up when phantom power is engaged.
10.
MIDI Out LED:
Flashes when MIDI data is sent from your software to M-Track Plus's
MIDI Out
.
11.
MIDI In LED:
Flashes whenever MIDI data is received from an external MIDI controller.
12.
USB LED:
Illuminates when a valid USB connection has been established between your
computer and M-Track Plus. Use this light to verify that M-Track Plus is receiving power
and is ready to use.
13.
LED Meters:
Indicates the audio level of the
Main Out
.