Инструкция для M-AUDIO SP-8B

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

2. Tweeter

By employing a specially developed 1" silk dome with magnetic shielding, the
tweeter can deliver distortion-free original sound and offer extremely natural
response. It minimizes reaction time by using fabric silk for excellent delivery,
and also minimizes resonance by adapting a unique internal damping technology.

3. Sub-Frequency Port

The hole in the rear panel is called a Sub-Frequency Port and is designed to
discharge extreme low frequencies under 30 Hz.

4. Enclosure

The enclosure has an important role just as the other components. The SP-8B’s
enclosure is designed to endure impact from inside under extreme conditions. It
employs special high-density MDF and unique interior reinforcement to provide
more stable performance.

5. Network & Power Amplifiers

The network & power amplifiers for the SP-8B are specially designed for this
woofer and tweeter. The network properly distributes low, mid, and high
frequencies to the components in order to reduce distortion and loss of sound,
thus achieving a naturally balanced sound.

In order to generate ultra crisp, powerful sound quality, there are two separate
power amplifiers inside the SP-8B to drive the woofer and tweeter separately in
a high-end bi-amp structure. The power delivered to the woofer driver at a rated
distortion is 55W and 45W is delivered to the tweeter.

3

1
2
3
4
5
6
7
8
9
10
11
12
Оглавление инструкции
  • Страница 1 из 13
    Studiophile SP-8B Users Manual Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Studiophile SP-8B
  • Страница 2 из 13
    Introduction Thank you for choosing the SP-8B Studiophile Series bi-amplified powered studio reference monitor speakers. M-Audio is well known for digital audio interface technology, digital converters, audio pre amps and mixers. Now, after long research and development, the Studiophile SP-8B is
  • Страница 3 из 13
    2. Tweeter By employing a specially developed 1" silk dome with magnetic shielding, the tweeter can deliver distortion-free original sound and offer extremely natural response. It minimizes reaction time by using fabric silk for excellent delivery, and also minimizes resonance by adapting a unique
  • Страница 4 из 13
    Rear Panel: 1. XLR INPUT: This jack accepts XLR input connections with either balanced or unbalanced wiring. The signal of the XLR INPUT is summed together with the TRS INPUT through a balanced input amplifier, allowing both inputs to be used simultaneously. Input specifications apply to both
  • Страница 5 из 13
    3. PRODUCT LABEL: This label contains the model and serial number information. 4. VENT PORT: This port aids in reproduction of very low frequencies by discharging frequencies below 30 Hz.. 5. VOLUME CONTROL: Use the volume control to set the output sound pressure from the SP-8B to proper levels as
  • Страница 6 из 13
    Installation For optimal performance of the SP-8B, please read the following thoroughly and carefully prior to installation. Precautions Handling: Please do not grab the speaker cones. The SP-8B set is packaged in the box tightly, so your attention is required when taking the monitors out of the
  • Страница 7 из 13
    1 2 e lum Vo 2 3 1 Inp R XL S TR Inp e lum ut TR R XL S 1 1 2 3 we Po r N IOOCK T SH U RICEN A ELECTT OP NO CK OF DO RIS ! l.• ba Un ms oh W• 0k l./1 0mV• r: 30 Ba we ms ity: 20p. Po k oh itiv Am p: 20t Sens / HF Im ut •Inpu 40W r: • Inp we p. Po •LF Vo S TR 3 ut R XL 2 2 3 1 1 2 S TR 3 R XL 3 we
  • Страница 8 из 13
    Placing the SP-8Bs Placing the speakers is one of the most important procedures in order to monitor sound accurately. To monitor with the SP-8Bs at their maximum capability, an appropriate listening environment and correct placement is required. Please, refer to the following in order to place the
  • Страница 9 из 13
    3. Place the SP-8Bs vertically with the woofer on the bottom. Placing the SP-8Bs horizontally is not recommended. Remarks: DO NOT place any obstacles that may block the flow of air in front or between the SP-8Bs. Also remove reflective materials such as glass, mirrors or metal from the monitoring
  • Страница 10 из 13
    Appendix A - Technical Specs Type: Two-way studio reference LF Driver: 8-inch magnetically-shield mineral-filled polypropylene curved cone with high temperature voice coil and damped rubber surround HF Driver: 1-inch magnetically-shield natural silk dome Frequency Response: 33Hz - 22kHz Crossover
  • Страница 11 из 13
    Appendix B - Block Diagram 11
  • Страница 12 из 13
    One Year Warranty MIDIMAN warrants that this product is free of defects in materials and workmanship under normal use for a period of one year from purchase date, so long as the product is: owned by the original purchaser; the original purchaser has proof of purchase from an authorized MIDIMAN
  • Страница 13 из 13