5
For Model HR2800
ENG102-1
For European countries only
Noise
The typical A-weighted noise level determined according
to 60745-2-6:
Sound pressure level (L
pA
) : 89 dB(A)
Sound power level (L
WA
) : 100 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG217-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-6:
Work mode : hammer drilling into concrete, 10 mm
diameter and 100 mm depth
Vibration emission (a
h,HD
) : 20 m/s
2
Uncertainty (K) : 1.5 m/s
2
For Model HR2810, 2810T
ENG102-1
For European countries only
Noise
The typical A-weighted noise level determined according
to 60745-2-6:
Sound pressure level (L
pA
) : 89 dB(A)
Sound power level (L
WA
) : 100 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG215-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-6:
Work mode : chiseling function
Vibration emission (a
h,CHeq
) : 15.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG303-1
Work mode : hammer drilling into concrete, 10 mm
diameter and 100 mm depth
Vibration emission (a
h,HD
) : 20 m/s
2
Uncertainty (K) : 1.5 m/s
2
For Model HR2811F, HR2811FT
ENG102-1
For European countries only
Noise
The typical A-weighted noise level determined according
to 60745-2-6:
Sound pressure level (L
pA
) : 90 dB(A)
Sound power level (L
WA
) : 101 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG215-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-6:
Work mode : chiseling function
Vibration emission (a
h,CHeq
) : 11.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG303-1
Work mode : hammer drilling into concrete, 10 mm
diameter and 100 mm depth
Vibration emission (a
h,HD
) : 15 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENH101-8
EC-DECLARATION OF CONFORMITY
Model; HR2800, HR2810, HR2810T, HR2811F,
HR2811FT
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
CE2007
000230
Tomoyasu Kato
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
GEB007-2
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to rotary hammer safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
1.
Wear ear protectors.
Exposure to noise can
cause hearing loss.
2.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3.
Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord.
Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock
the operator.
4.
Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun
glasses are NOT safety glasses. It is also
highly recommended that you wear a dust
mask and thickly padded gloves.
5.
Be sure the bit is secured in place before
operation.
6.
Under normal operation, the tool is designed
to produce vibration. The screws can come
loose easily, causing a breakdown or accident.
Check tightness of screws carefully before
operation.
7.
In cold weather or when the tool has not been
used for a long time, let the tool warm up for a
while by operating it under no load. This will
loosen up the lubrication. Without proper