27

MS-7641

Ce Support

to  enable  this  item  to  red  the  CPu  power  consumption  while  idle.  Not  all 

porcessors support enhanced halt tate (Ce).
SVM Support

this item allows you to enable/disable the AMd SVM (Secure Virtual Machine) 

technology.

AMd Cool’n’Quiet

the  Cool’n’Quiet  technology  can effectively  and  dynamically  lower  CPu  speed 

and  power consumption.

iMPortANt

to ensure that Cool’n’Quiet function is activated and will be working properly, it is 

required to double confirm that:

run BioS Setup, and select Cell Menu. under Cell Menu, find AMd Cool’n’Quiet, 

and set this item to “enabled”.

enter  Windows,  and  select  [Start]->[Settings]->[Control  Panel]->[Power  op-

tions]. enter Power options Properties tag, and select Minimal Power Manage-

ment under Power schemes.

Ce Support

to enable this item to read the CPu power consumption while idle. Not all porces-

sors support enhanced halt tate (Ce).
Adjust CPu FSB Frequency (Mhz)

this item allows you to select the CPu Front Side Bus clock frequency (in Mhz). 
oC Stepping

this item will be enabled after you set the overclocking frequency in the “Adjust 

CPu FSB Frequency (Mhz)”. And the following items will appear. this items will 

help the system to overclock step by step after system booting up.

Start oC Stepping From (Mhz)

this item is used to set the initial base clock. the system will boot with the initial 

base clock, and start to overclock from initial base clock to set base clock that 

you set in “Adjust CPu FSB Frequency (Mhz)” step by step.
oC Step

this item is used to set how many steps for base colck overclocking.
oC Step Count timer

this item is used to set the buffer time for every step.

Adjust CPu ratio

this item is used to adjust CPu clock multiplier (ratio). it is available only when the 

processor supports this function.
 Adjusted CPu Frequency (Mhz)

it shows the adjusted CPu frequency. read-only.
Adjust CPu-NB ratio

this item is used to adjust CPu-NB ratio.

*

*