![background image](/i/olympus/171203/olympus-dp26/h/olympus-dp26-019.png)
16
DP26
•
When DP2-TWAIN or cellSens is installed, the 1394 driver is also replaced with the dedicated
driver for the DP26. When this driver is installed, other 1394 devices except Olympus Digital
Camera for Microscope cannot be operated though connected. (Note that DP 25 cannot be
used.)
•
If you want to use an IEEE1394 device other than the DP26, open the Device Manager and
update the driver software of “OLYMPUS(R) MICROSCOPE 1394 DIGITAL CAMERA SYSTEM”
under “1394 Bus Host Controllers”.
4
IMAGE RECORDING PROCEDURE
4-1 Software
Before Installation
•
Quit all running applications before installing software.
•
The software cannot be installed unless the user account is registered as “computer administrator.” If the
user account is registered as a “Restricted account,” change it to the “Computer administrator” account.
(For the user account registration, refer to the instruction manuals for your computer.)
•
When using a 1394PCIe board, install it in the PC before installing software.
DP2-TWAIN is not included in this product. Download the installer from the following URL prior to use. For
installation procedures, refer to the following URL.
[DP2-TWAIN Download Site]
•
For Life Science
http://www.olympus.co.jp/jp/support/dl/bio-micro.cfm
•
For Industrial Solutions
http://www.olympus.co.jp/jp/support/dl/ind-micro-software.cfm
TWAIN Driver DP2-TWAIN