5.Advanced User Guidebook
the
F3
button to select
Time
for
Type
, with two purple dotted lines displayed
along the vertical direction of the screen, which indicating Cursor 1 and Cursor 2.
4.
According to the measured waveform, adjust the positions of Cursor1 and
Cursor2 by turning the
VERTICAL POSITION
knob
of CH1 and CH2. The
cursor increment window at the left bottom of the waveform shows absolute
difference, frequency and the present time of the two cursors.
Figure 5-54 Waveform of Cursor Measurement
The Cursor Measurement for FFT mode:
Press the
Cursor
button to display the cursor measurement function menu (CURS MEAS)
in the screen, which includes
Vamp
Measurement and
Freq
Measurement at the mode of
Figure 5-55 CURS MEAS Menu
The description of the cursor measurement menu is shown as the following table:
63
