115
Sh
oo
ting
Fu
nctio
ns
4
3
Use the four-way controller (
45
)
to select
Q
or
R
, and press the
4
button.
The camera returns to the control panel.
4
Press the shutter release button halfway.
The Shake Reduction function is
activated, and
k
appears in the status
screen, viewfinder, and Live View screen.
Q
Uses Shake Reduction. (default setting)
R
Does not use Shake Reduction.
•
The Shake Reduction function is not available in the following situations.
-
Self-timer shooting
- Remote Control shooting
-
when
p
mode is set
-
when HDR Capture is set, and the Auto Align function is disabled
-
during Composition Adjustment
•
The Shake Reduction function is activated in
Z
(Night Scene HDR) of
H
mode.
•
The Shake Reduction function will not fully work (for about 2 seconds)
immediately after the camera is turned on or is restored from Auto Power Off.
Wait for the Shake Reduction function to become stable before shooting.
•
You can also change the setting from the [
A
Rec. Mode 3] menu.
Shake Reduction
Shake Reduction
On
On
OK
OK
OK
Cancel
Cancel
MENU
e_kb524_84percent.book Page 115 Friday, June 15, 2012 12:13 PM