![background image](/i/pentax/157752/pentax-k-30/h/pentax-k-30-231.png)
229
Connecting to a
C
omputer
8
Saving Images on a Computer
Set the USB connection mode when connecting the camera to a
computer.
1
Select [Interface Options] in the [
R
Set-up 2] menu, and press
the four-way controller (
5
).
The [Interface Options] screen appears.
2
Use the four-way controller (
23
) to select [USB Connection],
and press the four-way controller (
5
).
3
Use the four-way controller (
23
) to select [MSC] or [PTP],
and press the
4
button.
Unless otherwise specified, select [MSC].
4
Press the
3
button twice.
The screen that was displayed before selecting the menu item appears
again.
Setting the USB Connection Mode
MSC
Mass Storage Class (default setting)
A general-purpose driver program that handles devices connected
to a computer via USB as a memory device.
PTP
Picture Transfer Protocol
A protocol that allows transfer of digital images and control of digital
cameras via USB.
e_kb524_84percent.book Page 229 Friday, June 15, 2012 12:13 PM