![background image](/i/pentax/152378/pentax-x5/h/pentax-x5-182.png)
180
6
Se
tti
ngs
4
Press the
4
button.
The start-up screen is set.
Pixel Mapping is a function for mapping out and correcting defective
pixels in the image sensor. Run the Pixel Mapping function if image dots
always seem to be defective in the same place.
1
Press the
3
button in
A
mode, and press the four-
way controller (
5
) twice.
The [
W
Setting] menu appears.
2
Use the four-way controller (
23
) to select [Pixel
Mapping].
3
Press the four-way controller (
5
).
The [Pixel Mapping] screen appears.
• Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card/built-in memory is
formatted.
• The start-up screen is not displayed when set to [Off].
• The start-up screen is not displayed when the camera starts up in
playback mode.
• The following images cannot be used as the start-up screen: images
taken with the recorded pixels of
o
/
n
/
0
/
1
/
h
,
images of smaller size than
h
with 4:3 aspect ratio, images taken at
F
(Digital Panorama) mode, and movies.
Correcting Defective Pixels in the Image Sensor
(Pixel Mapping)
When executing Pixel Mapping, display the [
W
Setting] menu in
A
mode. Pixel Mapping cannot be selected when the [
W
Setting] menu is
displayed in
Q
mode.