![background image](/i/president/155450/president-pm-2010-wp/h/president-pm-2010-wp-053.png)
53
2.
To stop scanning, press the
SCAN
button once more.
“SCAN”
and
“TRIPLE”
disappear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel
until the transmission ends, then resumes scanning after a
3 second delay period.
• When in the scan mode, the unit automatically activates
the Triple Watch feature. To desactivate Triple Watch from
the scanning mode, press the
TRI
button.
“TRIPLE”
disap-
pears from the display.
Transmitting
1.
Transmission power can be set to either 5W or 1W.
Press the
1/5W
button to make the
change, then the
“5W”
or the
“1W”
in-
dicator on the display changes ac-
cordingly.
TX Power will be set to 5W when is changed to 16CH. The TX
Power is able to change to 1 W at 16CH by pressing
1/5W
.
2.
To transmit, press and hold the
PTT
key.
“TX”
appears on
the display.
3.
To return to receive, release the
PTT
key.
“TX”
disappears
from the display.
• If the
PTT
key is pressed for more than 5 minutes,
“TX”
starts blinking and the transmission ends. The TX time out
tone will sound until the
PTT
key is released.
• If the battery indicator drops to the 1-mark level on the dis-
play, when the
PTT
key is pressed, the radio will not trans-
mit and the
“TX”
icon starts blinking (refer to the description
of the Battery Indicator).