![background image](/i/samsung/169083/samsung-itp5012l/h/samsung-itp5012l-162.png)
Page 146
© SAMSUNG Electronics Co., Ltd.
ANNEX
Nothing appears on the LCD screen while the ITP-5012L phone is being
used.
!
Check the data network cable is correctly connected to the LAN socket on the
ITP-5012L phone.
(Refer to ‘Assembling the ITP-5012L IP phone’ section of ‘Preparation’ in this guide.)
The ITP-5012L phone does not ring and volume is too low.
!
Press the [
▼
Volume
▲
] button to adjust the volume.
(Refer to ‘Volume Adjustment’ section of the ‘Things You Should Know’ section in
this guide.)
Conversation quality is reduced due to noise and echo.
!
If you are using the speakerphone, lift the handset and try speaking.
Excessive echo is heard during a page announcement or with Auto Answer
set.
!
If IP phones are too close to each other, sound from one speaker might echo
during a page or on auto answer call.
Keep a reasonable distance between IP phones.
Caller IDs are not displayed on the LCD screen.
!
Confirm with your System Administrator that the caller ID service is available from your
Telephone Company.
!
If the caller blocks the sending of their caller ID, the caller ID will not be displayed.
!
If the caller makes a call from an area where the caller ID cannot be provided
(e.g. international calls), the caller ID will not be displayed.
!
If the caller makes a call from a public phone, the caller ID will not be displayed.
!
If the caller ID received from the Telephone Company is corrupt, the caller ID will not be
displayed.
!
If the Telephone Company does not send a caller ID, the caller ID will not be displayed.
* Refer to ‘the Caller ID(CID) Presentation’ from the ‘Convenient Features’ section of this guide.
?
?
?
?
?