15
GB
You can check or change your selection of tracks at any time.
Press
once if you have started listening to the selection.
Press Program.
Result: The following indications appear:
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks,
CH
is displayed
instead of
PR
when you press Program.
Press Program again.
Result: The first track selected is displayed, together with the letter
CH
(Change).
Press Program one or more times until the track to be changed is
displayed.
If necessary, press the corresponding Disc (1, 2, 3) button to change
discs.
Press
/
to select a different track.
Press Program to confirm your change.
Press CD (
) to start listening to the selection.
Result: The first track selected is played.
You can store up to:
15 FM stations
15 AM stations
(
8 MW stations,7 LW stations )
Switch the system on by pressing Standby/on.
Select the TUNER function by pressing TUNER .
Select the required frequency band by pressing TUNER (Band)
again on the front panel or TUNER (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW(Option)
Long Wave
Tune in to the desired station.
Manual tuning
Press the Tuning Mode button so that the "
MANUAL
" indicator
lights up on the front panel display.
Press
/
on the main unit to tune in to the desired sta-
tion manually.
or
Press Tuning
or
on the remote control to do the same.
Automatic tuning
Press and hold
/
on the main unit for more than 1 second
so that the "
AUTO
" indicator lights up on the front panel display.
Press and briefly hold
/
on the main unit to begin automatic
tuning.
or
Press and briefly hold Tuning
or
on the remote control to
do the same.
Use the manual tuning method if the automatic tuning search does
not stop at the desired station because the signal is weak.
For details on the Preset function, see the
“Selecting a Stored
Station”
on page 16.
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
Select the FM stereo or mono mode by pressing Mono/ST. on the
remote control.
Checking or Changing Programmed
Tracks
1
2
3
4
5
6
7
8
Searching for and Storing the Radio
Stations
1
2
3
4
5
6
6
2,3,4,7
1
2,3,4,7
8
1
6
6
5
6
4
4
6
5
2,3
1
4
5
5
3
4
8
