GB
19
The timer enables you to switch the system on or off at spe-
cific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off auto-
matically, you must cancel the timer.
Before setting the timer, check that the current time is cor-
rect.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing Standby/On.
Press Timer/Clock until
TIMER
is displayed.
Press Enter.
Result:
ON TIME
is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-on time already
set; you can set the timer switch-on time.
Set the timer switch-on time.
a
Set the hour by pressing the
/
buttons.
b Press Enter.
Result: The minutes flash.
c Set the minutes by pressing the
/
buttons.
d
Press Enter.
Result:
OFF TIME
is displayed (instead of the equalizer sym-
bols) for a few seconds, followed by any switch-off time
already set; you can now set the timer switch-off time.
Set the timer switch-off time.
a
Set the hour by pressing the
/
buttons.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by pressing the
/
buttons.
d
Press Enter.
Result:
VOL XX
is displayed, where
XX
corresponds to the vol-
ume already set.
Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.
pressing the
/
buttons to select the source to be played
when the system switches on .
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in one of the
decks before setting the system to stand-
by.
TUNER (radio)
a Press
Enter
.
b Select a preset station by
pressing the
/
buttons
.
CD (compact disc)
Load one or more compact discs.
Press Enter to confirm the timer.
Press Standby/On to set the system to standby mode.
Result:
appears on the front panel display next to the time, indi-
cating the timer has been set. The timer automatically turns
the system on or off at a designated time.
If the timer switch on and off times are identical, the word
ERROR
is displayed.
Timer Function
7
8
9
5
6
1
2
3
4
To set the timer function
You can also use
Program/Set
button on the remote
control to instead
Enter
button in step 3,4,5,6,7,8.
1,9
2
3,4,5,6,7,8
4,5,6,7
4,5,6,7
