Network setup (SCX-3205W(K) only)
_ 35
Manual address configuration
1.
Start a web browser such as Internet Explorer that supports IPv6
addressing as a URL (See "Using SyncThru™ Web Service
(SCX-3205W(K) only)" on page 69).
For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the
address field and press the Enter key or click
Go
.
2.
When the
SyncThru™ Web Service
window opens, click
Network
Settings
.
3.
Click
TCP/IPv6
.
4.
Enable the
Manual Address
In the
TCP/IPv6
section.
5.
Select the
Address/Prefix
and click the
Add
button, then the router
prefix will automatically be entered into the address field.
Enter the rest of address. (ex: 3FFE:10:88:194::
AAAA
. “A” is the
hexadecimal 0 through 9, A through F.)
6.
Click the
Apply
button.
Installing printer driver
Driver installation for network printer in IPv6 network environment is same
as TCP/IPv4 (See "Installing network connected machine’s driver" on
page 32).
Select TCP/IP Port and when the list of machines are displayed, simply
select your machine's IPv6 address.
Using SyncThru™ Web Service
1.
Start a web browser such as Internet Explorer that supports IPv6
addressing as a URL.
2.
Select one of the IPv6 addresses (
Link-local Address
,
Stateless
Address
,
Stateful Address
,
Manual Address
) from
Network
Configuration Report
(See "Printing a network configuration report" on
3.
Enter the IPv6 addresses (ex: http://[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.
