![background image](/i/smeg/91331/smeg-s45vcx2/h/smeg-s45vcx2-037.png)
EN
Instructions for the User
34
14.2 Replacing the light bulb
WARNING:
Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
To replace the light bulb, proceed as follows:
Disconnect the oven from the power supply. Take the plug out
of the socket or switch off the oven’s power circuit.
Unscrew and remove the glass light cover
(1)
.
Remove the light bulb (2). Warning! The bulb may be very hot.
Fit a new E14 230-240V/15W bulb. Follow the lamp manufacturer’s
instructions. IMPORTANT NOTE: Make sure that the sealing rings (3)
are applied in the correct sequence.
Screw the glass light cover into place
(1)
.
Connect the oven again to the power supply.