![background image](/i/sony/168578/sony-bravia-kdl-40v3000/h/sony-bravia-kdl-40v3000-195.png)
29
GB
Usi
ng MENU
Func
ti
ons
AV Set-up
AV Preset
Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
input signals from connected equipment that you do not want displayed on the
screen.
1
Press
F
/
f
to select the desired input source, then press
.
2
Press
F
/
f
to select the desired option below, then press
.
Equipment labels:
Uses one of the preset labels to assign a name to connected
equipment.
“Edit:”:
Creates your own label. Follow steps 2 to 4 of “Programme Labels”
“Skip”:
Skips an unnecessary input source.
Auto S Video
Selects the input signal from S video sockets
6 when
/
6 sockets are both
connected.
AV2 Output
Sets a signal to be output through the socket labelled
/
2 on the rear of the TV.
If you connect a VCR or other recording equipment to the
/
2 socket, you can
then record from the equipment connected to other sockets of the TV.
“TV”:
Outputs a broadcast.
“AV1”:
Outputs signals from equipment connected to the
/
1 socket.
“AV6”:
Outputs signals from equipment connected to the
/
6
socket.
“Auto”:
Outputs whatever is being viewed on the screen (except signals from the
/
3, HDMI IN 4, HDMI IN 5, HDMI IN 7 and PC
/
sockets).
Speaker
Turns on/off the TV’s internal speakers.
“TV Speaker”:
The TV speakers are turned on in order to listen to the TV’s sound
through the TV speakers.
“Audio System”:
The TV speakers are turned off in order to listen to the TV’s sound
only through your external audio equipment connected to the audio output sockets.
When connected with an HDMI control compatible equipment, you can turn the
connected equipment on interlocked with the TV. This setting must be made after
connecting the equipment.
Audio Out
“Variable”:
The audio output from your audio system can be controlled by the TV’s
remote.
“Fixed”:
The audio output of the TV is fixed. Use your audio receiver’s volume
control to adjust the volume (and other audio settings) through your audio system.
Colour System
Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”
or “PAL60”) according to the input signal from the input source.
Continued