Before you start

4

Before you start

•   Keep the power adapter out of the reach 

of children.

•   Do not insert connector plugs into ports 

with force. If a plug can not be easily inserted 
into the port, maybe the connector and port 
do not match. Make sure that the connector 
matches the port and the connector is aligned 
with the port.

LCD

Liquid-cristal isplay (LCD) is a delicate 

device that requires careful handling.

•   Do not touch the screen with sharp objects.
•   Do not exert strong pressure on the 

screen and do not place any objects on it. This 
can cause damage to the display and failure of 
the device.

•   Do not expose the display to direct 

sunlight.

Cleaning and maintenance

•   Before cleaning the device, make sure it 

is switched off.

•   To clean the LCD screen and casing of 

the device use a soft cloth, special tissue and 
special cleaners. Do not use aerosol sprays, 
solvents, alcohol or abrasives.

  The manufacturer reserves the right to 

make changes in specifications, appearance, 
contents of SW and equipment of the goods 
unilaterally, without prior notice.

Utilization of the product

If you want to dispose this product, do not 

mix it with general household waste. There is a 
separate collection system for used electronic 
products in accordance with legislation that 
requires proper treatment, recovery and 
recycling.

Please contact your local authorities for 

the correct method of disposal. By doing so, 
you will ensure that your disposed product 
undergoes the necessary treatment, recovery 

and recycling and thus prevent potential 
negative effects on the environment and 
human health.

Battery

Connect the power adapter to the electric 

supply network and insert the adapter plug 
into the power connector of the device. 
While charging the process is displayed as 
an additional “lightning” symbol in the power 
icon:  . We recommend not to disconnect the 
device until the battery is fully charged. When 
the battery is fully charged, the power icon on 
the screen will be completely filled.

   In order to maintain efficiency and 

prolong the battery life, follow the instructions 
described below:

 •   Before first use, it is recommended to 

attach the device to the electric mains for 8-12 
hours to fully charge the battery.

 •   Do not charge the device at high 

temperature.

 •   Do not recharge the device too often: you 

can do this at a time when the display shows a 
low level of charge.

 •   If you are not using the device for a long 

time, recharge the battery at least once in two 
weeks, do not wait for the moment of complete 
discharge.

4