![background image](/i/yamaha/160250/yamaha-wr250fr-2002/h/yamaha-wr250fr-2002-183.png)
4 - 61
ENG
OIL FILTER ELEMENT, WATER PUMP AND RIGHT
CRANKCASE COVER
2. Install:
• Bearing
1
NOTE:
Install the bearing by pressing its outer race
parallel.
Impeller shaft
1. Install:
• Impeller shaft
1
• Washer
2
• Impeller
3
NOTE:
• Take care so that the oil seal lip is not dam-
aged or the spring does not slip off its posi-
tion.
• When installing the impeller shaft, apply the
lithium soap base grease on the oil seal lip
and impeller shaft. And install the shaft while
turning it.
• Hold the impeller shaft on its width across
the flats
a
with spanners, etc. and install the
impeller.
T
R
.
.
14 Nm (1.4 m · kg, 10 ft · lb)
Right crankcase cover
1. Install:
• Dowel pin
1
• O-ring
2
• Collar
3
• Gasket
4
NOTE:
Apply the lithium soap base grease on the O-
ring.
New
New