![background image](/i/yamaha/160250/yamaha-wr250fr-2002/h/yamaha-wr250fr-2002-207.png)
4 - 85
ENG
AC MAGNETO AND STARTER CLUTCH
9. Install:
• Shaft
1
• Bearing
2
• Idle gear 1
3
NOTE:
Apply the engine oil on the shaft, bearing and
idle gear inner circumference.
1
2
3
E
10. Install:
• Cover (idle gear 1)
1
• Bolt
2
NOTE:
Install the cover (idle gear 1) with its mark
a
facing upward.
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
a
2
1
2
11. Install:
• Engine guard
1
• Clamp
2
• Bolt [engine guard (front)]
3
• Bolt [engine guard (rear)]
4
• Cylinder head breather hose
5
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
3
2
5
1
2
4
12. Connect:
• AC magneto lead
Refer to “CABLE ROUTING DIAGRAM”
section in the CHAPTER 2.
13. Install:
• Shift pedal
1
• Bolt (shift pedal)
NOTE:
When installing the shift pedal onto the shift
shaft, be sure that the center of the shift pedal
is about 1 mm (0.04 in)
a
above the top of the
footrest.
T
R
.
.
12 Nm (1.2 m · kg, 8.7 ft · lb)