![background image](/i/yamaha/160250/yamaha-wr250fr-2002/h/yamaha-wr250fr-2002-076.png)
3 - 11
INSP
ADJ
THROTTLE LUBRICATION/
HOT STARTER LEVER ADJUSTMENT
THROTTLE LUBRICATION
1. Remove:
• Cover (throttle cable cap)
1
• Cover (grip cap)
2
• Throttle grip cap
3
2. Apply:
• Lithium soap base grease
On the throttle cable end
a
.
3. Install:
• Throttle grip cap
• Screw (throttle grip cap)
• Cover (grip cap)
• Cover (throttle cable cap)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
HOT STARTER LEVER ADJUSTMENT
1. Check:
• Hot starter lever free play
a
Out of specification
→
Adjust.
2. Adjust:
• Hot starter lever free play
NOTE:
After adjustment, check proper operation of
hot starter.
Hot starter lever free play
a
:
3 ~ 6 mm (0.12 ~ 0.24 in)
Hot starter lever free play adjustment
steps:
• Loosen the locknut
1
.
• Turn the adjuster
2
until free play
a
is
within the specified limits.
• Tighten the locknut.