![background image](/i/yamaha/160483/yamaha-xjr1300-l-1999/h/yamaha-xjr1300-l-1999-275.png)
6-55
CHAS
THE HANDLEBAR
NOTE:
NOTE:
NOTE:
NOTE:
WARNING
WARNING
3. Install:
handlebar grip
1
left grip end
2
There should be 1
3 mm of clearance
a
be-
tween the handlebar grip and the left grip end.
4. Install:
left handlebar switch
1
Align the pin on the left handlebar switch with
the hole
a
in the handlebar.
5. Install:
master cylinder (clutch)
1
master cylinder bracket
2
Align the mating surfaces of the master cylinder
with the punch mark
a
on the handlebar.
6. Install:
throttle grip
1
throttle cable housing
2
throttle cables
3
Apply a thin coat of lithium soap base grease
onto the inside of the throttle grip and install it
onto the handlebar.
Make sure that the pin
a
on the throttle
cable housing is aligned with the hole
b
in
the handlebar.
7. Install:
right grip end
1
right handlebar switch
2
Make sure that the throttle grip operates
smoothly.