![background image](/i/zelmer/151045/zelmer-34z050/h/zelmer-34z050-081.png)
81
GW34-026_v03
4) Functions
This function allows weighting some products, without necessity of removing them from the scales.
1. Switch on the scales with
ON/OFF (3) button
. Wait until „0.000” symbol appears on display.
2. Put the first product on the scales. Wait until you can see the result.
3. Press
Z/T (4) button
, to reset the display, so that it shows „0.000” before you put the next product on. You can repeat this
activity.
Place the first
product on
the scales
ATTENTION:
Removing the products (in case of two products on the scales):
after removing the first product, you will see „0.000” on display; after removing the second product you shall see its weight,
–
when you press
–
Z/T button (4)
: after removing the first product, you shall see its weight; after removing the second product, you
shall see the weight of both products on display.
Place the
second product
(without
removing the
former)
Reset
Scales unstable
Readiness status
The weight of the
second product
Switch off the scales
The operation
is over
Switch on the
scales
Readiness status
The weight of the first
product