![background image](/i/zelmer/151045/zelmer-34z050/h/zelmer-34z050-083.png)
83
GW34-026_v03
„TARE” function
If the sum of weights of all products is > 4% of maximum scales load (200 g with maximum load 5 kg) the display shall show „----” or
„0g” every time, when you press
Z/T (4) button
.
symbol „-----” means, that the scales is unstable and you should wait a bit,
–
symbol „0” and „TARE” on the left side of the display means, that „TARE” function is active.
–
Maximum load is reduced by total weight of all products on the scales.
Auto switch off
The scales shall switch off automatically, if the display shows „0.000” or the
same weight for 2 minutes.
Switch off the
scales
Readiness status
Place the
product on the
scales
Gross weight
Reset
Scales
instable
Readiness
status
I.e. the product
were in the
bowl – remove
them
Net weight