32
Additional Information
Indicators
There are three indicators which show the status of the projector. Check the following for information about the
indicator lights. If there is anything wrong, turn the projector off and contact your dealer.
When the projector is in a normal state, ...
When the projector is in an abnormal state, ...
POWER
(Green)
POWER
(Orange)
LAMP STATE
REMARK
Green
Orange
Red
Initial the projector.
Cannot accept any commands.
Off
Orange
Off
Standby mode.
Off
Flashing
Orange
Lamp is warming up.
Cannot turn the projector off.
Green
Off
Power on.
Flashing
Green
Off
Lamp is cooling down.
Cannot turn the projector on.
POWER
(Green)
POWER
(Orange)
LAMP
(Red)
STATE
REMARK
Green
Off
Flashing
red
three
times in
a row
The internal temperature is too
high.
•
The intake ventilation or the
exhaust ventilation is
blocked.
•
The projector may be in a
poorly ventilated location.
•
The ambient temperature
may be too high.
Solution:
•
Make sure that the
ventilation holes are not
blocked.
•
Relocate the projector.
•
Stop using the projector
until the ambient
temperature falls within the
specified range. The
maximum operating
temperature is specified as
35°C / 95°F.
Off
Flashing
red two
times in
a row
The fans are not working.
Solution:
•
Check if the power supply is
stable.
•
Check if there is object stuck
in the fans.
•
Contact your dealer.
Off
Red
The projection is damaged.
Contact your dealer.
Flashing
Green
Flashing
Orange
Off
Almost time to to replace the
lamp. The lamp has been used for
2000 hours. (The power is on.)
Solution:
•
Install a new lamp.
Green
Orange
Flashing
Red
The lamp is too hot to turn the
projector on.
Solution:
•
Wait for 3 minutes to cool
down the projector. You can
restart the projector when it
is back to standby mode.
