7
Safety, Regulatory and Legal Information
Safety Instructions
Safety Instructions
1.
The lamp becomes extremely hot during
operation. Allow the projector to cool for
approximately 45 minutes prior to removing the
lamp assembly for replacement.
2.
Do not operate lamps beyond the rated lamp
life. Excessive operation of lamps beyond the
rated life could cause them to explode on rare
occasions.
3.
Never replace the lamp assembly or any
electronic components unless the projector is
unplugged.
4.
Do not place this product on an unstable cart,
stand, or table. The product may fall, sustaining
serious damage.
5.
To reduce the risk of electric shock, do not
disassemble this appliance. Take it to a qualified
technician when service or repair is required.
Incorrect reassembly can cause malfunction of
the projector or electric shock when the
appliance is subsequently used.
6.
This product is capable of displaying inverted
images for ceiling mount installation. Please use
BenQ’s Ceiling Mounting Kit for mounting the
unit and ensure it is securely installed.
7.
Do not block the ventilation holes.
- Do not place this unit on a blanket, bedding or any
other soft surface.
- Do not cover this unit with a cloth or any other item.
- Do not place inflammables near the projector.
If the ventilation holes are seriously obstructed,
overheating inside the unit may cause damage to the
lamp, the projector to fail or result in fire.
