MAINTENANCE PROCEDURES
mmo2008-008-061_a
1. Drain tube
2. Clamp
3. Plug
NOTICE
Do not start engine when
liquids/deposits are found in the
drain tube.
When liquids or deposits are found, air
filter and housing must be inspected,
dried or replaced depending on its con-
dition.
Air Injection Valve
Air Injection Valve Location
Air injection valve is located on the LH
side of the vehicle underneath front
fender.
vmo2008-020-008_a
TYPICAL
1. Air injection valve
Air Injection Valve Cleaning
NOTE:
Clean cover before removing.
Remove cover retaining screws.
Remove air injection valve cover.
vmo2008-020-001_a
1. Remove screws
Remove filter from air injection valve.
vmo2007-008-004_a
TYPICAL
1. Air injection valve
2. Screen
3. Air filter
Clean air filter and inside of air injection
valve using pressurized air.
NOTE:
If the air filter is still dirty, re-
place it with a new one.
When finished, properly reinstall re-
moved parts in the reverse order of
their removal.
Spark Arrester
Spark Arrester Cleaning
The muffler must be periodically
purged of accumulated carbon.
_______________
89