![background image](/i/dell/157587/dell-7330-7330dn/h/dell-7330-7330dn-132.png)
Printer Settings
Dell 7330 Mono Laser Printer
5-4
Accessing the Startup Page
The printer can produce a Startup Page each time the printer is turned on or reset. The factory
default is Off. You can turn on automatic printing of the Startup Page or print it from the
Information Pages
menu.
To turn on/off the Startup Page use either:
■
The printer’s control panel
■
Embedded Web Server
Using the Control Panel
To turn on/off the Startup Page:
1.
Select
Printer Setup
, and then press the
OK
button.
2.
Select
Printer Controls
, and then press the
OK
button.
The
Startup Page
is highlighted. The end of the line displays the setting (
On
or
Off
).
3.
Press the
OK
button to change the setting.
Using the Embedded Web Server
To turn on/off the automatic printing of the Startup Page:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field.
3.
Select
Properties
.
4.
Select the
General
folder on the left navigation panel.
5.
Select
Printer Defaults
.
6.
Select
Off
or
On
from the
Printer Startup Page
drop-down list to change the setting.
7.
Click
Save Changes
at the bottom of the page.
Printing the Startup Page Using the Control Panel
To print the Startup Page:
1.
Select
Information
, and then press the
OK
button.
2.
Select
Information Pages
, and then press the
OK
button.
3.
Select
Startup Page
, and then press the
OK
button to print.