![background image](/i/dell/153139/dell-b1165nfw/h/dell-b1165nfw-024.png)
1
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
If the installation window does not appear, click
Start
>
All programs
>
using the cable. If your machine is attached to a network, skip the following
Accessories
>
Run
.
steps below and go on to installing a network connected machine’s driver (see
X:\
Setup.exe
replacing “X” with the letter, which represents your CD/
"Installing driver over the network" on page 141).
DVD drive and click
OK
.
•
For Windows 8,
• If you are a Mac or Linux operating systems user, refer to the "Installation
If the installation window does not appear, from
Charms
, select
or
"Installation for Linux" on page 133.
Search
>
Apps
and search for
Run
. Type in X:\Setup.exe, replacing
• The installation window in this
User’s Guide
may differ depending on the
“X” with the letter that represents your CD/DVD drive and click
OK
.
machine and interface in use.
If “
Tap to choose what happens with this disc
.” pop-up window
• Only use a USB cable no longer than 3 meters (118 inches).
appears, click the window and select
Run Setup.exe
.
Select
New Printer
.
3
Windows
Make sure that the machine is connected to your computer and
powered on.
If the “
Found New Hardware Wizard
” appears during the installation
procedure, click
Cancel
to close the window.
Insert the supplied software CD into your CD/DVD drive.
The software CD should automatically run and an installation window
will appear.
1. Introduction
2