![background image](t135.png)
3
4
Wired network setup
Printing a network configuration report
You can print
Network Configuration Report
from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
Press the
(
Menu
) button on the control panel and select
Network
>
Network Config.
.
Using this
Network Configuration Report
, you can find your machine’s MAC
address and IP address.
For example:
•
MAC Address: 00:15:99:41:A2:78
•
IP Address: 169.254.192.192
Setting IP address
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 18).
• TCP/IPv6 is not supported by this program.
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from
Control
Panel
>
Security Center
>
Windows Firewall
.
Install this program from the supplied CD/DVD by double-click
1
Application
>
SetIP
>
Setup.exe
.
Follow the instructions in the installation window.
2
Connect your machine to the network with a network cable.
3
Turn on the machine.
4
From the Windows
Start
menu, select
All Programs
>
Dell >Printers
>
5
SetIP
>
SetIP
.
Click the
icon (third from left) in the SetIP window to open the TCP/
6
IP configuration window.
2. Using a Network-Connected Machine
135