![background image](t170.png)
20
Wireless network setup
Turning the Wi-Fi network on/off
Check whether the machine is connected to the network.
1
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
2
your machine’s new IP address in the browser window.
For example,
Click
Login
on the upper right of the Embedded Web Service website.
3
Type in the
ID
and
Password
, then click
Login
.
4
•
ID: admin
•
Password: dell00000
When the
Embedded Web Service
window opens, click
Settings
>
5
Network Settings
.
Click
Wireless
>
Custom
.
6
You can also turn the Wi-Fi network on/off.
21
Setting the Wi-Fi Direct for mobile printing
Wi-Fi Direct is an easy-to-setup peer-to-peer connecting between method for
your printer and a mobile device that provides a secure connection and better
throughput than ad hoc mode.
With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while
concurrently connecting to an access point, You can also use a wired network
and a Wi-Fi Direct network simultaneously so multiple users can access and print
documents both from Wi-Fi Direct and from a wired network.
• You cannot connect to the internet through the printer’s Wi-Fi Direct.
• The supported protocol list may differ from your model, Wi-Fi Direct
networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP
services.
Setting up Wi-Fi Direct
You can enable Wi-Fi Direct feature by one of the following methods.
From the USB cable-connected computer(recommended)
•
When setting from the supplied software CD, see the access point via USB
cable.
2. Using a Network-Connected Machine
170