![background image](/i/dell/156050/dell-c7765dn/h/dell-c7765dn-287.png)
Machine Information
287
2
Select the memory number to use.
Factory Defaults
You can use the factory default settings.
Custom Settings
Displays the numbers stored in the memory.
Programming
You can check or change the value set for the print mode item number.
1
Select [Programming].
2
Enter the item number of the feature to set in
[Item Number] with the numeric keypad.
3
Select [Confirm].
4
Select [Change Value].
5
Enter [New Value] with the numeric keypad.
6
Select [Save].
Store / Delete Programming
For ESC/P-K and HP-GL/2 emulations, you can register settings in memory.
You can register up to 20 print modes for ESC/P-K and HP-GL/2 emulations.
1
Select [Store / Delete Programming].
2
Select [Store Current Selections] or [Delete].
Store Current Selections
Stores the current selections. If you select a
number already used, its settings will be
overwritten with the new settings. The
overwritten settings cannot be restored.
Delete
Select this to delete a programming.