Инструкция для DELL C7765dn

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Status Code

661

033-551

[Cause] You attempted to change a job immediately before fax or telephone communication

completed.

[Remedy] Wait for a while, and execute the operation again.

033-552

[Cause] The total quantity of error lines detected with G3 exceeded the set value.
[Remedy] Confirm the model of the other machine, and execute the operation again. If receiving,

ask the sender to send again.

033-553

[Cause] This machine does not have confidential or relay function. The F-code sent from the

other machine contains an instruction for a function not supported by the machine.

[Remedy] If necessary, check whether the sender entered an invalid F-code.

033-554

[Cause] The password was omitted or did not match in fax communication.
[Remedy] No measure is required.

033-555

[Cause] The password received from the other machine did not match the password for receiving

faxes on the machine.

[Remedy] Check whether the sender specified an incorrect machine password.

033-556

[Cause] The password sent to the other machine did not match the password for receiving faxes

on the other machine.

[Remedy] If necessary, check whether the correct machine password has been instructed to the

other machine.

033-557

[Cause] The number of services or of recipients exceeds the maximum limit.
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of

recipients, and then send again.

033-558

[Cause] The machine is set to reject faxes without a remote ID, and a remote ID was not sent

from the other machine.

[Remedy] Ask the sender to set a remote ID. If necessary, set the machine to receive even when a

remote ID is not sent.

033-563

[Cause] Paper that can print faxed documents is not loaded in a tray.
[Remedy] Take one of the following measures:

• Specify the paper size.
• Confirm whether the paper tray is set correctly.

033-564

[Cause] The machine was turned off during communication.
[Remedy] Wait for a while, confirm the fax service settings and the fax number, and then send

again if sending. If the error still is not resolved, contact Customer Support at

dell.com/contactdell

033-565

[Cause] Cannot send because too many recipients are specified.
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of

recipients, and then send again.

033-566

[Cause] Cannot send because the recipient (fax number) is not specified.
[Remedy] Correctly specify the recipient's fax number.

033-567

[Cause] The recipient (fax number) is incorrect.
[Remedy] Correctly enter the recipient's fax number, and execute the operation again.

033-568

[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If receiving, ask the sender to send again. If the error still

is not resolved, contact Customer Support at

dell.com/contactdell

Status Code

Cause and Remedy