![background image](/i/dell/156050/dell-c7765dn/h/dell-c7765dn-370.png)
15 Tools
370
Primary Server Name/Address
Enter the primary server name or IP address.
Note
•
For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
•
For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a
hexadecimal value.
Primary Server - Port Number
Set the primary server port number from 1 to 65535.
The default value is 88.
Note
•
Do not use the numbers assigned to the other ports.
Secondary Server Name/Address
Enter the secondary server name or IP address.
Note
•
For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
•
For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a
hexadecimal value.
Secondary Server - Port Number
Set the secondary server port number in the range from 1 to 65535.
The default value is 88.
Note
•
Do not use the numbers assigned to the other ports.
Domain Name
When you use Active Directory of Windows Server
®
2003, Windows Server 2008, or
Windows Server 2012 as server, specify the domain name of Active Directory in [Domain
Name]. Up to 64 characters are allowed.
Note
•
Enter a realm name in uppercase characters. Otherwise, an authentication error occurs.
LDAP Server/Directory Service Settings
Configure the directory server, authentication method, and search attributes and ranges for
LDAP authentication and the Address Book search by LDAP.
Primary Server Name/Address
Enter the primary server name or IP address.
Note
•
For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
•
For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a
hexadecimal value.
Primary Server - Port Number
Set the Primary server port number from 1 to 65535.
The default value is 389.
Note
•
Do not use the numbers assigned to the other ports.
Secondary Server Name/Address
Enter the secondary server name or IP address.
Note
•
For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value 0 to 255.
•
For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a
hexadecimal value.
Secondary Server - Port Number
Set the secondary server port number from 1 to 65535.