21

How does main brush avoid being tangled 

26.  

by power cord?

        Answer: Robot is probably get tangled by the 

wire scattered

on

the

floor

when

it

is

operating

.

 At that time, robot will try to turn 

back to get rid of it, and it will make alarm 
sound when it fails after trying several times. 

22

How can I stop the robot from operating 
on appointment time since I will be away 
from home for sometime?

        Answer: You can cancel appointment 

cleaning.

23

How can I transfer my robot?

        Answer: You can lift it up with both your 

hands and lay on the ground quickly, dust 
and garbage in dust box will come out if it is 
not place back in time.

24

How to use robot most effectively?

        Answer: Put the robot and charger in the 

same room, because it would shorten 
seeking time and it can extend the working 
time. If you need robot to clean every room 
of house, you should put the charger in the 
middle of house for the convenience of 
return back to charge.

25

What should do if robot sucked liquid?

        Answer: a. Turn off the power and take out 

dust box, then empty it and wipe it dry. b. 
Draw out the sponge filter and wipe it dry. c. 
Take out main brush and clean it, then use 
day cloth to wipe the brush and its interior. 
Wait until the brush is day and place it back. 
d. Let the product dry by itself for at least 
12hours(make sure circuit board is dry and 
then get power on) If the procedures above 
still do not make it work, please contact our 
after-sales service.

.

.

.

Deebot

Deebot

Deebot

.

.

How to clean the LCD screen?

        Answer: Please clean the screen with soft 

dry cloth to wipe away the fingerprint

or 

other dirt

.

27.  Why the side brush is easy to destroy?

       Answer: 

                    1.Check  whether  the  side  brush  set  in 

correct  position.  Side  brush's  color  should 
be the same as the groove's color.

                      2.Take  away  the  messy  thing,  which  is 

easy  to  enwind  with  the  side  brush  in 
advance, such as power cord.

28.  Why deebot’s working time is short & why  

deep can not charge?

        Answer: 

You  can  reactive 

  battery  as  the 

following:

        Take deebot out of the charging station after 

charging for around 3 minutes and recharge 
after  1  minute.  Do  the  cycle  for  3  time  and 
charge 

 continuously for 12 hours.

After  doing  the  above,  if  your 

still  can  not  wor k  nor mally,  please 

contact  the  ser vice  depar tment  for 

more infor mation.

39

dee

bot

E n j o y  S m a r t e r  L i f e !