![background image](/i/freggia/134945/freggia-hc640vgtb-hc320vw-hc320vb-hc640vgtw/h/freggia-hc640vgtb-hc320vw-hc320vb-hc640vgtw-012.png)
12
INSTRUCTIONS FOR THE USER
•
NOTICE
•
When the equipment is not working, always check that the knobs are in the closing position.
•
If the flame should blow out accidentally, the safety valve will automatically stop the gas supply, after a few
seconds. To restore operation, set the knob to the lighting point (large flame, fig.1).
•
While cooking with fat or oil, pay the utmost attention as these substances can catch fire when overheated.
•
D o n o t u s e s p r a y s n e a r t h e a p p l i a n c e i n operation.
•
Do not place unstable or deformed pots on the burner, so as to prevent them from overturning or overflowing.
•
Make sure that pot handles are placed properly.
•
When the burner is started up, check that the flame is regular and, before taking pots away, always lower the
flame or put it out.
CLEANING
Before any operation, disconnect the appliance from the electric grid. Don’t use a steam cleaner for the
cleaning the hob
. It is advisable to clean the appliance when it is cold.
•
GLASS PLATFORm AND ENAmELLED PARTS
The glass platform and all of the enamelled parts must be washed with a sponge and soapy water or with a light
detergent.
Do not use abrasive or corrosive products. Do not leave substances, such as lemon or tomato juice, salt water, vinegar,
coffee and milk on the enamelled surfaces for a long time.
•
STAINLESS STEEL PARTS
Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive detergents for an
extended period of time. The stainless steel parts should also be cleaned with soapy water and then dried with a soft
cloth.
•
BURNERS AND RACKS
These parts can be removed to make cleaning easier. The burners must be washed with a sponge and soapy water or
with a light detergent, wiped well and placed in their housing perfectly. Make sure that the flame-dividing ducts are
not clogged. Check that the feeler of the safety valve and the start-up electrode are always perfectly cleaned, so as to
ensure an optimum operation.
•
GAS TAPS
The possible lubrication of the taps must be carried out by specialized personnel, exclusively.
In case of hardening or malfunctions in the gas taps, apply to the Customer Service.
INSTRUCTIONS FOR THE USER