14
English
5)
Battery
tool
use
and
care
a)
Recharge
only
with
the
charger
speci
fi
ed
by
the
manufacturer.
A charger that is suitable for one type of battery pack
may create a risk of
fi
re when used with another
battery pack.
b)
Use
power
tools
only
with
speci
fi
cally
designated
battery
packs.
Use of any other battery packs may create a risk of
injury and
fi
re.
c)
When
battery
pack
is
not
in
use,
keep
it
away
from
other
metal
objects
like
paper
clips,
coins,
keys,
nails,
screws,
or
other
small
metal
objects
that
can
make
a
connection
from
one
terminal
to
another.
Shorting the battery terminals together may cause
burns or a
fi
re.
d)
Under
abusive
conditions,
liquid
may
be
ejected
from
the
battery;
avoid
contact.
If
contact
accidentally
occurs,
fl
ush
with
water.
If
liquid
contacts
eyes,
additionally
seek
medical
help.
Liquid ejected from the battery may cause irritation
or burns.
6)
Service
a)
Have
your
power
tool
serviced
by
a
quali
fi
ed
repair
person
using
only
identical
replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep
children
and
in
fi
rm
persons
away.
When
not
in
use,
tools
should
be
stored
out
of
reach
of
children
and
in
fi
rm
persons.
GRASS
TRIMMER
SAFETY
WARNINGS
IMPORTANT
READ
CAREFULLY
BEFORE
USE
KEEP
FOR
FUTURE
REFERENCE
Safe
operation
practices
●
Training
a) Read the instructions carefully. Be familiar with the
controls and the proper use of the machine.
b) Never allow people unfamiliar with these instructions
or children to use the machine. Local regulations can
restrict the age of the operator.
c) Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
●
Preparation
a) Never operate the machine while people, especially
children, or pets are nearby.
b) Wear eye protection and stout shoes at all times while
operating the machine.
●
Operation
a) Use the machine only in daylight or good arti
fi
cial light.
b) Never operate the machine with damaged cover or
without cover in place.
c) Switch on the motor only when the hands and feet are
away from the cutting means.
d) Always disconnect the machine from the power supply
(i.e. remove the plug from the mains or remove the
disabling device)
– whenever leaving the machine unattended;
– before clearing a blockage;
– before checking, cleaning or working on the
machine;
– after striking a foreign object;
– whenever the machine starts vibrating abnormally.
e) Take care against injury to feet and hands from the
cutting means.
f) Always ensure that the ventilation openings are kept
clear of debris.
●
Maintenance
and
storage
a) Disconnect the machine from the power supply (i.e.
remove the plug from the mains or remove the disabling
device) before carrying out maintenance or cleaning
work.
b)
Use only the manufacturer’s recommended
replacement parts and accessories.
c) Inspect and maintain the machine regularly. Have the
machine repaired only by an authorized repairer.
d) When not in use, store the machine out of the reach of
children.
PRECAUTIONS
FOR
CORDLESS
GRASS
TRIMMER
WARNING
1. Exercise patience in all work with the tool. And dress
properly to keep warm.
2. Plan all work ahead to prevent accidents.
3. Do not operate the tool at night or under bad weather
conditions when visibility is poor. And do not operate
the tool when it is raining or right after it has been
raining.
Working on slippery ground could lead to an accident if
you lose your balance.
4. Inspect the nylon head before starting work.
Do not use the tool if the nylon head is cracked, scarred
or bent.
Make sure the nylon head is properly attached. A nylon
head that falls apart or comes loose during operation
could cause an accident.
5. Be sure to attach the cover before starting work.
Operating the tool without this parts could lead to injury.
6. Be sure to attach the loop handle before starting work.
Make sure it is not loose but properly attached before
starting work. Hold the loop handle
fi
rmly during work
and do not swing the tool around, but use the correct
posture and maintain your balance.
Losing your balance during work could lead to an
injury.
7. Take care when starting the motor.
Place the tool on level ground.
Do not operate the tool within 15 m of people or
animals.
Make sure that the nylon head does not come into
contact with the ground or trees and plants.
A careless start could lead to injury.
8. Do not secure the lock lever.
Accidentally pulling back the lever could lead to
unexpected injury.
9. Before leaving the tool, press the power button to turn it
o
ff
.
10. Operate the tool with care near electric cables, gas
pipes and similar installations.
11. Look out for and remove empty cans, wire, stones or
other obstacles before starting work. And do not work
near tree roots or rocks.
Working in such areas could damage the nylon head or
lead to injury.
12. Never touch the nylon head during operation.
Also make sure it does not come into contact with your
hair, clothes, etc.
13. In the following situations, turn o
ff
the motor and check
that the nylon head has stopped rotating.
To move to another work area.
To remove rubbish or grass that has become stuck in
the tool.