8

English

11.

If there is battery leakage, foul odor, heat generated,
discolored or deformed, or in any way appears
abnormal during use, recharging or storage,
immediately remove it from the equipment or
battery charger, and stop use.

CAUTION

1.

If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and contact
a doctor immediately.
If left untreated, the liquid may cause eye-problems.

2.

If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.

3.

If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return it
to your supplier or vendor.

WARNING

If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fire.  Please observe the
following matters when storing the battery.

䡬

Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.

䡬

Either install the battery in the power tool or store
by securely pressing into the battery cover until
the ventilation holes are concealed to prevent short-
circuits (See Fig. 1).

SPECIFICATIONS

POWER TOOL

STANDARD ACCESSORIES

1

Plus driver bit (No. 2 

×

 65L) ............................... 1

2

Battery (BCL1015) ..................................................... 2

3

Charger (UC10SFL) ................................................... 1

4

Battery cover ............................................................. 1

5

Plastic case ................................................................ 1

Standard accessories are subject to change without
notice.

OPTIONAL ACCESSORIES (sold separately)

1. Battery (BCL1015)

Optional accessories are subject to change without notice.

No-load speed (Low/High)

0 – 300 / 0 – 1300 min

–1

Wood

Drilling

(Thickness 18 mm)

21 mm

Metal

Steel: 10 mm

Capacity

(Thickness 1.6 mm)

Aluminum: 12 mm

Machine screw

6 mm

Driving

Wood screw

5.8 mm (diameter) 

×

 45 mm (length)

(Requires a pilot hole)

Rechargeable battery

BCL1015: Li-ion 10.8 V / 12 V Peak (1.5 Ah 3 cells)

Weight

1.0 kg

APPLICATIONS

䡬

Driving and removing of machine screws, wood
screws, tapping screws, etc.

䡬

Drilling of various woods.

䡬

Drilling of various metals.

BATTERY REMOVAL/INSTALLATION

1. Battery removal

Hold the handle tightly and push the battery latch to
remove the battery (see 

Figs. 1

 and 

2

).

CAUTION:

Never short-circuit the battery.

2. Battery installation

Insert the battery while observing its polarities (see

Fig. 2

).

CHARGING

Before using the power tool, charge the battery as follows.

1. Connect the charger power cord to the receptacle
2. Insert the battery in the charger

Position the battery so that the nameplate faces
toward the nameplate of the charger and press in the
battery until it comes into contact with the bottom
plate (See 

Fig. 3

).

Inserting the battery will turn on the charger (the
pilot lamp lights up).

CHARGER

Model

UC10SFL

Charging voltage

10.8 V

Weight

0.35 kg

01Eng_DS10DFL_EE

10/4/30, 09:50

8