GB

9

Start-up and use

WARNING!

 The oven is 

provided with a stop system 

to extract the racks and 

prevent them from coming 

out of the oven (1).

As shown in the drawing, 

to extract them completely, 

simply lift the racks, holding 

them on the front part, and 

pull (2).

!

 The first time you use your appliance, heat the empty oven with 

its door closed at its maximum temperature for at least half an 

hour. Make sure that the room is well ventilated before switching 

the oven off and opening the oven door. The appliance may emit 

a slightly unpleasant odour caused by protective substances 

used during the manufacturing process burning away.

!

 To make the setting process easier, keep the knob in 

position: this will increase the scrolling speed of the numbers 

on the display.

!

 Each setting will automatically be stored in the appliance 

memory after 10 seconds.

!

 The touch controls cannot be activated if the user is 

wearing gloves.

Some models are equipped with a system of hinges which 

allows the door to close slowly, without the user having to 

follow the movement through with his/her hand. To use the 

system correctly, before closing the door:

•  Open the door fully.

•  Do not force the closing movement manually.

!

 In order to optimise the cooking performance, when 

starting the selected function, product settings will be 

applied that could cause a delayed start of the fan and 

heating elements.

Control panel lock

!

 The control panel can be locked while the oven is off, once 

cooking has started or finished and during programming.

To lock the door and the oven controls, press and hold the 

 button for at least 2 seconds. A buzzer sounds and the 

display shows the key symbol “n—O”. The 

 and 

icons, when lit, indicate lock function activation.

To deactivate the lock, press and hold the 

 button again 

for at least 2 seconds.

!

 When cleaning the appliance, the door lock may be closed 

accidentally (there is an exposed spring). If this happens, 

reopen it by turning the door lock upwards (see figure).

KO

OK

Setting the clock

!

 The clock can only be set when the oven is switched off. If 

the oven is in standby mode, pressing the 

 button once will 

display the current time setting. Press it again to set the time.

After connection to the power supply network or after a 
blackout, the 

 button and the digits on the display will 

flash for 10 seconds.

To set the clock:
1. Press button 

.

2. Turn the TIMER knob towards “

” and “ ” to adjust the 

hour value.

3. Once you have reached the correct hour value, press 

the 

 button.

4. Repeat the above process to set the minutes.

If a blackout occurs, it will be necessary to reset the clock. 
If the 

 icon flashes on the display, this indicates that the 

clock has not been set correctly.

Setting the minute minder

!

 The minute minder may still be set whether the oven is 

switched on or off. It does not switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer 

that will automatically stop after 30 seconds or when any 

active button on the control panel is pressed.

To adjust the timer proceed as follows:

1. Press button 

.

2. Adjust the time as desired by turning the TIMER knob 

towards “

” and “ ”.

3. Once you have reached the desired value, press the 

button again.
The lit 

 symbol will remind you that the minute minder 

is on. The DISPLAY will show the countdown.
To cancel the minute minder, press the 

 button and use 

the knob to set the time to 00:00. Press button  again.
The 

 icon will switch off to indicate that the minute minder 

has been disabled.

Starting the oven

1. Switch the control panel on by pressing the 

 button. 

The appliance buzzer sounds three times (ascending) and 

all buttons light up in sequence.

2. Select the desired cooking mode by turning the 

SELECTOR knob. The display shows:

- the temperature associated with the mode, if programming 

manually;

-  “Auto”  and  the  duration  alternately,  if  programming  is 

automatic.

3. Press the 

 button to begin cooking.

4. The oven will begin its preheating phase, the preheating 

indicators will light up as the temperature rises.

5. When the preheating process has finished, a buzzer sounds 

and all the preheating indicator lights show that this stage has 

been completed: the food can then be placed in the oven.

6. During cooking it is always possible to:

- modify the temperature by turning the THERMOSTAT  

knob (manual modes only);