![background image](/i/hp/126386/hp-proliant-dl560-gen9-2xxeon10c-e5-4620v3-20ghz-4x16gbr2d-2133/h/hp-proliant-dl560-gen9-2xxeon10c-e5-4620v3-20ghz-4x16gbr2d-2133-019.png)
NOTE:
Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an
HP approved configurator. Contact your local sales representative for additional information.
HP Unique Options
HP ProLiant DL560 Gen9 CPU Mezzanine Board Kit
NOTE:
This kit is required if configured with 4 processors.
795107-B21
HP ProLiant DL560 Gen9 Bay2 8SFF Cage/Backplane Kit
NOTE:
This optional kit adds 8SFF drives for Bay2.
795084-B21
HP ProLiant DL560 Gen9 Bay1 8SFF Cage/Backplane Kit
NOTE:
This optional kit adds 8SFF drives for Bay1.
795085-B21
HP ProLiant DL560 Gen9 Primary 2 Slot Riser Kit
NOTE:
This is an optional PCIe riser kit for the Primary Riser Slot 1
793475-B21
HP ProLiant DL560 Gen9 Universal Media Bay Kit
NOTE:
An optional Optical Disk Drive can be added, either DVD-ROM (726536-
B21) or DVD-RW (726537-B21).
795090-B21
HP ProLiant DL560 Gen9 2SFF Universal Media Bay Kit
NOTE:
Universal Media Bay kit with a 2SFF drive bay; an optional Optical Disk Drive
can be added, either DVD-ROM (726536-B21) or DVD-RW (726537-B21).
793479-B21
HP ProLiant DL560 Gen9 NVMe 6 SSD Express Bay Kit
774743-B21
NOTE:
“The HP ProLiant DL560 Gen9 NVMe 6 SSD Express Bay kit can only be
installed in Bay2”.
NOTE:
“The HP ProLiant DL560 Gen9 Bay1 8SFF Cage/Backplane kit cannot be
installed in Bay1 when the HP ProLiant DL560 Gen9 NVMe 6 SSD Express Bay Kit
is installed in Bay2. However, Universal Media Bay kits can be installed in Bay 1.
NOTE:
Prior to making an HP ProLiant DL560 Gen9 NVMe 6 SSD Express Bay kit
selection it is highly recommended that the HP Power Advisor is run to determine the
right size power supply for your server configuration. The HP Power Advisor is
located at:
http://www.hp.com/go/hppoweradvisor
.
HP ProLiant DL560 Gen9 Bay3 to H240 Slot 7/ Bay 3 to P840/440 Riser1 and 2SFF-
UMBay SAS Cable Kit
NOTE:
Required for connecting Bay1 Universal Media Bay 2SFF drive bay to a
P840/P440 controller, or if using controller H240 in slot7 attached to Bay3. Also
needed if using controller P840/P440 in riser1 attached to Bay3.
797924-B21
HP ProLiant DL 560 Gen9 Bay 1 to Riser1/AROC and Bay 2/3 to Riser2/Slot7 SAS
Cable Kit
NOTE:
Required if controllers H240/P440ar/H240ar/B140i in riser1/AROC (Smart
Array HBA Connector) need to be connected to Bay1, or if controllers P840/P440 in
Riser2/slot7 need to be connected to Bay2/3. Also needed if controller P440 in slot7
needs to be connected to Bay2/3.
797945-B21
HP ProLiant DL560 Gen9 Bay 2 to Riser1/AROC and Bay 2/3 to Riser1/2 SAS Cable
Kit
NOTE:
Required if using controllers H240/P440ar/H240ar/B140i in riser1/AROC
(Smart Array HBA Connector) which need to be connected to Bay2, or if using
controllers P840/P440 in Riser1/2 which need to be connected to Bay2/3.
797946-B21
HP ProLiant DL560 Gen9 SAS Expander Card
804228-B21
HP ProLiant DL560 Gen9 Power Module with SID
Kit
795106-
B21
QuickSpecs
HP ProLiant DL560 Generation9 (Gen9)
Core Options
DA - 15296 Worldwide QuickSpecs — Version 3 — 8.17.2015
Page 19