Internal Storage
Devices

One of the following
depending on model

Hard Drives

None ship standard

Hard Drive Bays
 

(8) Hot plug SFF SAS/SATA HDD bays in Entry and Base Models, (16) in
Performance Models; upgradable to a maximum of (24)
For drives: Bay3 (8SFF) is standard; Bay 2 (8SFF) is populated next, followed
by Bay 1(8SFF)
If one of the two Optional Universal Media Bay Kits is chosen, a maximum of
(18) SFF drives are available as versus (24). Universal Media Bay Kits occupy
Bay1 and can include an optional Optical Disk Drive; a version has an optional
2SFF drive bay as well.

Optional Optical Drive
 

Available via Universal Media Bay kit; with and without (2)SFF drive bay
An optional optical drive can be added to either the Universal Media Bay Kit
with 2SFF drive bay (793479-B21) or the Universal Media Bay Kit without 2SFF
drive bay (795090-B21).

Maximum Internal
Storage

CAPACITY

CONFIGURATION

Hot Plug SFF SATA

48 TB

24 x 2 TB

Hot Plug SFF SAS

48 TB

24 x 2 TB

Hot Plug SFF SATA SSD

38 TB

24 x 1.6TB

Hot Plug SFF SAS SSD

46 TB

24 x 1.92TB

Power Supply

One of the following
depending on model

(1) HP 1200W Common Slot Platinum Hot Plug Power Supply

NOTE: 

Entry Models have a single HP 1200W Common Slot Platinum Hot Plug Power Supply.

(2) HP 1200W Common Slot Platinum Plus Hot Plug Power Supplies

NOTE: 

Base and Performance Models have redundant HP 1200W Common Slot Platinum Plus Hot Plug

Power Supplies.

Common Slot
Power Supplies

One of the following depending on power requirements:
 
HP 1500W Common Slot Platinum Plus Hot Plug Power Supply
HP 1500W Common Slot 48VDC Hot Plug Power Supply
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply
HP 1200W Common Slot Platinum Hot Plug Power Supply

NOTE: HP 

1500W Common Slot Platinum Plus Hot Plug Power Supply supports high line voltage only.

Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to
determine the right size power supply for your server configuration. The HP Power Advisor is located at:

http://www.hp.com/go/hppoweradvisor

.

 
HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of
ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest
power supply efficiency without degrading system performance. HP CS power supplies are tested by the
Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program.
HP CS power supply options provide efficiency ratings of up to 94% (80 Plus Platinum) and are available
in several power output options including -  1200W, 1500W - allowing the customer to "right-size" a power
supply for their specific server configuration. All HP Common Slot power sources are UL, CE Mark
Compliant, hot-plug and support redundant configurations.
 
HP CS Platinum Plus power supplies are required when enabling HP's Intelligent Power Discovery (IPD)
solution. IPD is the first technology to create an automated, energy-aware network between IT systems
and facilities. This allows your company to reclaim millions of dollars in wasted power capacity and
downtime costs across data centers. For more information on HP's IPD solution, go to

http://www.hp.com/go/ipd

.

NOTE: 

Mixing of power supplies in the same server is not supported. All power supplies must be of the

same output and efficiency rating. If non-matched power supplies are inserted you will get errors and
operation will fail.

NOTE:

 All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This

jumper cord is also included with each standard AC power supply option kit. If a different power cord is

QuickSpecs

HP ProLiant DL560 Generation9 (Gen9)

Standard Features

DA - 15296   Worldwide QuickSpecs — Version 3 — 8.17.2015

Page  5