Server Power Cords

Server ships with high-voltage server to PDU power cord

NOTE:

 If customers require a local power cord, they can check the power cord matrix for the

appropriate SKU. Please see the following power cord matrix for details:

http://www.hp.com/go/powercordmatrix

Common Slot Power
Supply

One of the following
depending on power
requirements

HP 1500W Common Slot Platinum Plus Hot Plug Power Supply

HP 1500W Common Slot 48VDC Hot Plug Power Supply

HP 1200W Common Slot Platinum Plus Hot Plug Power Supply

NOTE: 

1500W power supply supports high line voltage only

NOTE:

 A minimum of two (2) power supplies are required. Four (4) 1500W power supplies offers

N+N redundancy for highly loaded configurations.

Prior to making a power supply selection it is highly recommended that the HP Power Advisor is
run to determine the right size power supply for your server configuration. The HP Power Advisor
is located at:

http://www.hp.com/go/hppoweradvisor

.

HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide
range of ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to
provide the highest power supply efficiency without degrading system performance. HP CS power
supplies are tested by the Electric Power Research Institute (EPRI) and certified through the
ECOS 80 Plus power supply program. HP CS power supply options provide efficiency ratings of
up to 94% (80 Plus Platinum) and are available in three power output options - 460W, 750W, and
1200W - allowing the customer to "right-size" a power supply for their specific server
configuration. All HP Common Slot power sources are UL, CE Mark Compliant, hot-plug and
support redundant configurations.

HP CS Platinum Plus power supplies are required when enabling HP's Intelligent Power
Discovery (IPD) solution. IPD is the first technology to create an automated, energy-aware
network between IT systems and facilities. This allows your company to reclaim millions of dollars
in wasted power capacity and downtime costs across data centers. For more information on HP's
IPD solution, go to 

http://www.hp.com/go/ipd

.

NOTE:

 Mixing of power supplies in the same server is not supported. All power supplies must be

of the same output and efficiency rating. If non-matched power supplies are inserted you will get
errors and operation will fail.

System Fans

4 Hot Plug Fans (eight rotors with N+1 redundancy)

Graphics

Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)

Form Factor

4U rack

QuickSpecs

HP ProLiant DL580 Gen9 Server

Standard Features

DA - 15187   Worldwide QuickSpecs — Version 2 — 8.17.2015

Page  9