4. Intelligent Key insertion indicator
This indicator appears when the Intelligent Key
needs to be inserted into the Intelligent Key
port. (For example, the Intelligent Key battery is
discharged.)
If this indicator appears, insert the Intelligent
Key into the Intelligent Key port in the correct
direction.
(See
“PUSH-BUTTON
IGNITION
SWITCH” in the “5. Starting and driving” sec-
tion.)
5. Intelligent Key removal indicator
This indicator appears when the driver’s door is
opened with the ignition switch in the LOCK
position and the Intelligent Key placed in the
Intelligent Key port. A key reminder chime also
sounds.
If this indicator appears, remove the Intelligent
Key from the Intelligent Key port and take it with
you when leaving the vehicle.
6. NO KEY warning
The warning appears when the door is closed
with the Intelligent Key left outside the vehicle
and the ignition switch in the ACC or ON
position. Make sure that the Intelligent Key is
inside the vehicle.
When all the doors are closed, an outside chime
and inside warning chime will also sound.
See “INTELLIGENT KEY SYSTEM” in the “3. Pre-
driving checks and adjustments” section.
7. SHIFT “P” warning
This warning appears when the ignition switch
is pushed to stop the engine with the selector
lever in any position except the P (Park) posi-
tion.
If this warning appears, move the selector lever
to the P (Park) position or push the ignition
switch to the ON position.
An inside warning chime will also sound.
See “INTELLIGENT KEY SYSTEM” in the “3. Pre-
driving checks and adjustments” section.
8. “LOCK” warning
This warning appears when the selector lever is
moved to the P (Park) position with the ignition
switch in the ACC position after the SHIFT “P”
warning appears.
To push the ignition switch to the LOCK posi-
tion, perform the following procedure:
SHIFT “P” warning
→
(Move the selector lever
to “P”)
→
LOCK warning
→
(Push the ignition
switch
→
ignition switch position is turned to
ON)
→
LOCK warning
→
(Push the ignition
switch
→
ignition switch position is turned to
LOCK)
9. NO KEY ID indicator
This indicator appears when the ignition switch
is pushed and the Intelligent Key cannot be
recognized by the system with the ignition
switch in the LOCK position.
If this indicator appears, you cannot start the
engine. Check for the following causes and
perform remedies:
●
The battery of the Intelligent Key carried with
you is discharged completely. Replace the
battery with a new one.
●
The Intelligent Key carried with you is not
registered to the system. Use the registered
Intelligent Key.
●
You do not have an Intelligent Key with you.
Carry an Intelligent Key with you.
Instruments and controls
2-23
w
—
—
05/14/09—pattie
X