Backing up behind a projecting
object
The position
s
C
is shown further than the
position
s
B
in the display. However, the posi-
tion
s
C
is actually at the same distance as the
position
s
A
. The vehicle may hit the object
when backing up to the position
s
A
if the object
projects over the actual backing up course.
HOW TO ADJUST THE SCREEN
To adjust the Display ON/OFF, Brightness, Tint,
Color, Contrast and Black Level of the RearView
Monitor, push the
SETTING
button with the
RearView Monitor on, select the item key and
adjust the level using the INFINITI controller.
Do not adjust the Brightness, Tint, Color, Con-
trast and Black Level of the RearView Monitor
while the vehicle is moving. Make sure the
parking brake is firmly applied and the engine
is not running.
OPERATING TIPS
●
When the selector lever is shifted to the R
(Reverse) position, the monitor screen auto-
matically changes to the RearView Monitor
mode. However, the radio can be heard.
●
It may take some time until the RearView
Monitor or the normal screen is displayed
after the selector lever has been shifted to R
from another position or to another position
from R. Objects may be distorted momen-
tarily until the RearView Monitor screen is
displayed completely.
●
When the temperature is extremely high or
low, the screen may not clearly display
objects. This is not a malfunction.
●
When strong light directly enters the cam-
era, objects may not be displayed clearly.
This is not a malfunction.
●
Vertical lines may be seen in objects on the
screen. This is due to strong reflected light
from the bumper. This is not a malfunction.
●
The screen may flicker under fluorescent
light. This is not a malfunction.
●
The colors of objects on the RearView Moni-
tor may differ somewhat from those of the
actual object.
●
Objects on the monitor may not be clear in a
dark place or at night. This is not a malfunc-
tion.
●
If dirt, rain or snow attaches to the camera,
the RearView Monitor may not clearly dis-
play objects. Clean the camera.
●
Do not use alcohol, benzine or thinner to
clean the camera. This will cause discolora-
tion. To clean the camera, wipe with a cloth
dampened with diluted mild cleaning agent
and then wipe with a dry cloth.
●
Do not damage the camera as the monitor
screen may be adversely affected.
SAA1924
Monitor, climate, audio, phone and voice recognition systems
4-27
w
—
—
05/14/09—pattie
X