![background image](/i/infiniti/150938/infiniti-m35-2010/h/infiniti-m35-2010-323.png)
How to change the set vehicle speed
To cancel the preset speed,
use any of these
methods:
●
Push the CANCEL switch. The set vehicle
speed indicator will go out.
●
Tap the brake pedal. The set vehicle speed
indicator will go out.
●
Turn the MAIN switch off. Both the MAIN
switch indicator and set vehicle speed indi-
cator will go out.
To reset at a faster cruising speed,
use one of
the following methods:
●
Depress the accelerator pedal. When the
vehicle attains the desired speed, push and
release the SET/COAST switch.
●
Push and hold the RESUME/ACCELERATE
switch. The set vehicle speed will increase
by approximately 5 MPH (5 km/h for
Canada).
●
Push,
then
quickly
release
the
RESUME/ACCELERATE switch. Each time you
do this, the set speed will increase by
approximately 1 MPH (1 km/h for Canada).
To reset at a slower cruising speed,
use one of
the following methods:
●
Lightly tap the brake pedal. When the ve-
hicle attains the desired speed, push the
SET/COAST switch and release it.
●
Push and hold the SET/COAST switch. The
set vehicle speed will decrease by approxi-
mately 5 MPH (5 km/h for Canada).
●
Push, then quickly release the SET/COAST
switch. Each time you do this, the set speed
will decrease by approximately 1 MPH (1
km/h for Canada).
To resume the preset speed,
push and release
the RESUME/ACCELERATE switch. The vehicle
will resume the last set cruising speed when the
vehicle speed is over 25 MPH (40 km/h).
How to change the set distance to
the vehicle ahead
The distance to the vehicle ahead can be se-
lected at any time depending on the traffic
conditions.
Each time the DISTANCE switch
s
A
is pushed,
the set distance will change to long, middle,
short and back to long again in that sequence.
SSD0680
5-38
Starting and driving
w
—
—
05/15/09—pattie
X